For Fiat Linea Bat Mirror Cover Piano Black Batman

Important Notice: The Product is Not a Spare Part, It is on the Original Mirror Cover It is being glued! The package includes mounting material (double-sided tape, silicone etc. ) IS NOT AVAILABLE. Product features: If You Want to Make Sure It Compatible with the Vehicle Model and Year in the Title, You can also consult. The product is sent in two pieces, right and left. The product is made of ABS Plastic. The product is in Piano Black Color. By placing it on the original mirror cover with double-sided tape or silicone. It must be glued. Assembly Instruction: 1- Install in a dry and dust-free environment. 2-The ambient temperature during installation should be between 15C and 35C. If the ambient temperature is below 15C, the surface should be cleaned with a hair dryer etc.. By heating Install. 3-Starting from the Oval and Closed Surface without Removing the Tapes of the Part to be Pasted Make an Assembly Trial First. 4- Clean the surface to be bonded with a cotton cloth, rubbing alcohol or pure alcohol. Clean it. After cleaning the surfaces to be bonded protect from dust and grease. The surface to be bonded is oily such as Wet Wipes, Water, Thinner, Gasoline, Diesel, Cologne. And do not clean with additives. 5-After applying the cleaning process to the surface to be bonded, wait 5 minutes. Then Start the Pasting Process. 6-If you have the opportunity, apply the bodywork to 1-2 points of the product next to the double-sided tape. We Recommend You to Squeeze the Silicone (dayson) The Product Will Stick Much More Strongly. 7-During the assembly process, wipe the product with a soft cloth or fingertips. Make it sit by stroking it. One Minute Pressure on the Piece and the Hair Again Drying Machine Etc.. Apply heat with the help of attention: ; Since the Tape Used Will Show Its Full Features Within 24 Hours Use the Pasted Part Carefully. Be careful not to wash your vehicle within 24 hours. Then, fix it with a band aid from the outside of the product. Remove the bands for up to 1 day. Do not remove it.