Sajten stöder inte din webbläsare. Uppdatera webbläsaren eller ladda ner en annan

AC 100-240V till DC 12V 83.3A 1000W Spänningswandler geregelte

Nuvarande pris
Från Pris 187,50 kr
Vid beställning över 2+ valfria produkter
inklusive moms
Fri frakt den 15-23 juni

Färg och storlek

Fri frakt 8‑14  arbetsdag
Returvillkor
Säkra betalningar
Vår kundtjänst talar svenska
Dokument om säkerhet och efterlevnad
Tillverkare

Specifikationer

Spänning
100–240 V

Beskrivning

3d printing machine
4,5/2 000+

Recensioner 36

4,6
14 december 2019
DC 12V 42A 500W

Sit well features super.super!!!!!!!

27 november 2023
DC 12V 42A 500W

Top quality, gladly again

7 maj
DC 12V 42A 500W

I ordered two more units from other sellers, but this one is the highest quality, both in terms of the case and the filling. The maximum voltage is 14.8 volts, the minimum is 11.11 volts. I did not check the maximum current, but when connected to a discharged battery, it easily produces 20 amperes. The capacitors at the output are installed at 25 volts, which will allow you to redesign the unit for a voltage of up to 15.25 volts for the charger without replacing them. The only drawback is that the fan runs constantly, and not depending on the temperature as written on the case (although this is not so bad) and in addition, it is also quite noisy. However, if you build the unit into some kind of charger case, it may not be so noisy, or you will need to reduce its supply voltage. I recommend buying it.

20 mars
DC 12V 83.3A 1000W

Device arrived damaged. All corners to attach device are folded and the side is full of dents and a lot of caps (deep scratches) in it. When testing the power supply it appears not to work, it jumps on and off continuously, no voltage comes out!